AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Nikon camera control pro 2.9.012/18/2023 Made the following additions to the CUSTOM SETTINGS MENU:.Added N-RAW 12-bit (NEV) and ProRes RAW HQ 12-bit (MOV) RAW video recording options under Video file type.Made the following additions to the VIDEO RECORDING MENU:.The control panel now displays the current frame size and frame rate in video mode.Added display zoom ratios of 50% and 200% for use during video recording.Changed the size of the area the camera uses to meter values for Preset manual white balance.Changed the procedure for choosing a color temperature when Choose color temperature is selected for white balance.High-speed frame capture now features “pre-release burst” recording.In photo mode, the control panel now shows additional information for long time-exposures, including the elapsed time and time remaining.Added Wide-area AF (C1) and Wide-area AF (C2) AF-area modes.Note: Some Custom Settings have been renumbered due to the addition of new menu options. Note: The changes listed below under “Still Photography”, “Video Recording”, “Displays”, “Playback”, and “Controls” are detailed in the Z 9 Reference Guide (Supplement for Firmware Version 2.00 – direct link). Switch focus/control ring roles * to the CUSTOM SETTING MENU in position f10.Focus ring rotation range * to the CUSTOM SETTING MENU in position f9, and.Save focus position and Recall focus position * to the roles that can be assigned using Custom Setting f2 in the CUSTOM SETTING MENU,.Support for NIKKOR Z 800mm f/6.3 VR S lenses,.The movie-record button would not function with certain gimbals while video was being recorded to an external device via HDMI with 3840×2160 30p, 3840×2160 25p, or 3840×2160 24p selected for Frame size/frame rate in the MOVIE SHOOTING MENU and 10 bit selected for Advanced > Output data depth in the SETUP MENU.Jitter would occur in movies recorded while footage was being output to an HDMI device with 3840×2160 60p or 3840×2160 50p selected for Frame size/frame rate in the MOVIE SHOOTING MENU.Pictures viewed by rotating the main command dial after zooming in on an image in “tall” (portrait) orientation in the viewfinder would not display correctly.Reactivating the standby timer in User Settings mode U1, U2, or U3 would cause the shutter speed to change if the stored value was slower than 30 s.The camera would sometimes fail to focus on the subject in the focus area in pictures taken immediately after the battery was inserted.Memory recall has been altered so that regardless of the focus mode selected, the focus position chosen via autofocus does not change if the shutter-release button is pressed halfway while memory recall is in effect.The camera focuses more readily on the subject in the center of the frame if it fails to detect the face or eyes of a portrait subject when Auto-area AF is selected for AF-area mode.* As of April 20, 2022, these features are available only with NIKKOR Z 70-200mm f/2.8 VR S lenses.
0 Comments
Read More
Leave a Reply. |